Kia Sportage: Wireless smart phone charging system / A wireless smart phone charging
1. Remove any object on the smart phone charging pad including the smart key.
If there is any foreign object on the pad other than a smart phone, the wireless
charging function may not operate properly.
2. Place the smart phone on the center of the wireless charging pad.
3. The indicator light will change to orange once the wireless charging begins.
After the charging is complete, the orange light will change to green.
4.You can choose to turn the wireless charging function to either ON or OFF by
selecting the USM on the instrument cluster. (Please refer to “Instrument Cluster”
for details).
If the wireless charging does not work, gently move your smart phone around the
pad until the charging indicator light turns orange. Depending on the smart phone,
the charging indicator light may not turn green even after the charging is complete.
If the wireless charging is not functioning properly, the orange light will blink
and flash for ten seconds then turn off. In such cases, remove the smart phone from
the pad and replace it on the pad again, or double check the charging status.
If you leave the smart phone on the charging pad when the vehicle ignition is
in OFF, the vehicle will alert you through warning messages and sound (applicable
for vehicles with voice guidance (function) after the ‘Good bye’ function on the
instrument cluster ends.
WARNING - Distracted driving
Driving while distracted can result in a loss of vehicle control that may
lead to an accident, severe personal injury, and death. The driver’s primary responsibility
is in the safe and legal operation of a vehicle, and use of any handheld devices,
other equipment, or vehicle systems which take the driver’s eyes, attention and
focus away from the safe operation of a vehicle or which are not permissible by
law should never be used during operation of the vehicle.
CAUTION - Metal in Wireless Charging System
If any metallic object such as coins is located between the wireless charging
system and the smart phone, the charging may be disrupted. Also, the metallic object
may heat up and potentially damage the charging system. If there is any metallic
object between the smart phone and the charging pad, immediately remove the smart
phone. Remove the metallic object after it has cooled down.
✽ NOTICE
- When the interior temperature of the wireless charging system rises
above a set temperature, the wireless charging will cease to function. After
the interior temperature drops below the threshold, the wireless charging function
will resume.
- The wireless charging may not function properly when there is a heavy
accessory cover on the smart phone.
- The wireless charging will stop when using the wireless smart key search
function to prevent radio wave disruption.
- The wireless charging will stop when the smart key is moved out of
the vehicle with the ignition in ON.
- The wireless charging will stop when any of the doors is opened (applicable
for vehicles equipped with smart keys).
- The wireless charging will stop when the vehicle is turned OFF.
- The wireless charging will stop when the smart phone is not in complete
contact with the wireless charging pad.
- Items equipped with magnetic components such as credit card, telephone
card, bankbook, any transportation ticket and such may become damaged during
wireless charging.
- Place the smart phone on the center of the charge pad for best results.
The smart phone may not charge when placed near the rim of the charging pad.
When the smart phone does get charged, it may heat up excessively.
- For smart phones without built-in wireless charging system, an appropriate
accessory has to be equipped.
- Smart phones of some manufacturers may display messages on weak current.
This is due to the particular characteristic of the smart phone and does not
imply a malfunction on wireless charging function.
- The indicator light of some manufacturers’ smart phones may still be
orange after the smart phone is fully charged. This is due to the particular
characteristic of the smart phone and not a malfunction of the wireless charging.
- When any smart phone without a wireless charging function or a metallic
object is placed on the charging pad, a small noise may sound. This small sound
is due to the vehicle discerning compatibility of the object placed on the charging
pad. It does not affect your vehicle or the smart phone in any way.
A wireless smart phone charging system located in front of the center console
Firmly close all doors, and turn the ignition to ACC or IGN ON. To start wireless
charging, place the smart phone equ ...
To use the hanger, pull down the upper portion of hanger.
CAUTION - Hanging clothing
Do not hang heavy clothes, since those may damage the hook.
WARNING
Do not adjust the User Setting while dr ...
Other information:
The certification label is located on the driver's door sill at the center pillar.
This label shows the maximum allowable weight of the fully loaded vehicle. This
is called the GVWR (Gross Vehicle Weight Rating). The GVWR includes the weight of
the vehicle, all occupants, fuel and cargo.
...
Replacement
1.
Using a remover, remove the hood release handle (A).
2.
Install in the reverse order of removal.
• ...