Other information:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV terminals 1 and 2.
4.
Check that the resistance is within ...
■ Rear combination lamp - Type A
■ Rear combination lamp - Type B
■ Rear turn signal & Back up lamp
■ License plate lamp
■ High mounted stop lamp
(1) Tail lamp (BULB type)
(2) Stop and tail lamp (BULB type)
(3) Stop lamp (LED type)
(4) Stop and tail lamp (LED type)
( ...