Kia Sportage: Fuses / Fuse/relay panel description
If the main fuse is blown, it must be removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery cable.
3. Remove the nuts shown in the picture above.
4. Replace the fuse wit ...
Inside the fuse/relay panel covers, you can find the fuse/relay label describing
fuse/relay name and capacity.
✽ NOTICE
Not all fuse panel descriptions in this manual may be applicable to your ...
Other information:
Component Location Index
Engine Room
[LHD]
1. Ambient temperature Sensor
2. Receiver-drier
3. Condenser
4. Compressor
5. Discharge Hose
6. Service Port (Low Pressure)
7. Service Port (High Pressure)
8. A/C P ...
Removal
BSM (Balance Shaft Module) Chain System
1.
Remove the timing chain.
(Refer to Timing System - "Timing Chain")
2.
Install a stopper pin (A) after compressing the balance shaft chain
tensioner.
...