Kia Sportage: Panorama sunroof / Roller Blind Repair procedures

Kia Sportage QL (2015-2025) Service Manual / Body (Interior and Exterior) / Panorama sunroof / Roller Blind Repair procedures

Replacement

[Removal]

1.	Open the roller blind using the panorama sunroof switch.

2.	Remove the roof trim. (Refer to Roof Trim - "Roof Trim Assembly")

Remove the roller blind bar.

(1)	Release the lock to blind shoe (B) by sliding the blind bar (A) in the direction of the arrow.

(2)

Remove the blind bar (A) from the blind shoe (B) by turning it in the direction of the arrow.

Fix the removed roller blind bar (A) to the blind lower support (B) so that it doesn't roll up.

4.	Remove the roller blind (A) after loosening the screw.

[Installation]

1.	Install the roller blind (A).

2.	Correctly install the roller blind to the mechanism rail (A) to roller blind corner.

Install the roller blind bar (A) to the roller blind shoe (B).

(1)	Install the roller blind bar (A) to the roller blinds shoe (B) from the front.

(2)	Install the roller blind bar (A) to the roller blinds shoe (B) by turning it in the direction of the arrow.

(3)	Pull blind bar (A) in the direction of the arrow and install it on the shoe (B).

Install the roof trim.

(Refer to Roof Trim - "Roof Trim Assembly")

Resetting the Panorama Sunroof.

(Refer to Body Electrical System - "Panorama Sunroof Motor")

Panorama Sunroof Deflector Repair procedures

Replacement 1. Completely open the movable glass using the panorama sunroof switch. 2. Loosen he mounting screws (A) located at the s ...

Mechanism Rail Components and components location

Component Location 1. Mechanism rail ...

Other information:

Kia Sportage QL (2015-2025) Service Manual: Rear Center Seat Belt Retractor Repair procedures

Replacement When installing the belt, be careful not to damage the retractor. 1. Remove the roof trim. (Refer to Roof Trim - "Roof Trim Assembly") ...

Kia Sportage QL (2015-2025) Service Manual: Brake/Clutch Fluid Repair procedures

Inspection Check the brake fluid level in the brake fluid reservoir. The level should be between “MIN” and “MAX” marks on the side of the reservoir. Use only hydraulic brake fluid conforming to DOT 3 or DOT 4 specification. Check the brake system for any lea ...