Kia Sportage: Heating,Ventilation And Air Conditioning / Specifications

Kia Sportage QL (2015-2024) Service Manual / Heating,Ventilation And Air Conditioning / Specifications

Specification
Air Conditioner
Item
Specification
R 2.0
NU
THETA
Compressor
Type
DVE16N
Oil type & Capacity
PAG 30 120 ± 10cc (4.05 ± .33oz.)
Pulley type
6PK-TYPE
Displacement
160cc/rev
Expansion valve
Type
Block type
Refrigerant
Type
R-134a, R-1234yf
Capacity
550 ± 25g (19.4 ± 0.88oz.)

Blower Unit
Item
Specification
Fresh and recirculation
Operating method
Actuator
Blower
Type
Sirocco
Speed step
Auto + 8 speed (Automatic), 1-4speed (Manual)
Speed control
Power mosfet (Automatic), Resistor (Manual)
Air filter
Type
Particle filter

Heater and Evaporator Unit
Item
Specification
Heater
Type
Pin & Tube type
Heating capacity
4,700 - 5% kcal/hr
Mode operating method
Actuator
Temperature operating method
Actuator 
Evaporator
Temperature control type
Evaporator temperature sensor
A/C ON/OFF
ON : -0.5°C (31.1.8°F)
OFF: -1.5°C (29.3°F)
Heating capacity
4,800 - 5% kcal/hr

Tightening Torques
Items
N·m
kgf·m
lb·ft
Compressor
Mounting bolt
20.0 - 32.95
2.04 - 3.36
14.75 - 24.30
Limiter bolt
5.0 - 7.0
0.51 - 0.71
3.7 - 5.1
Clutch bolt
9.8 - 14.7
1.0 - 1.5
7.2 - 10.8
Discharge hose - bolt
7.8 - 11.8
0.8 - 1.2
5.8 - 8.7
Discharge pipe - bolt
Suction hose - bolt
Liquid tube & hose - bolt
Discharge hose - nut
7.8 - 11.8
0.8 - 1.2
5.8 - 8.7
Discharge pipe - nut
Suction hose - nut
Liquid tube & hose - nut

Heating,Ventilation And Air Conditioning
...

Special service tools
Special Service Tools Tool Name / Number Illustration Description Disc & hub assembly bolt remover 09977- 3R000 ...

Other information:

Kia Sportage QL (2015-2024) Service Manual: Components and components location


Components Location 1. PCV Valve 2. Canister 3. Purge control solenoid valve (PCSV) 4. Fuel tank air filter 5. Catalytic converter (WCC) 6. Catalytic converter (UCC) 7. Leveling Tube 8. Vapor Tube (Canister ↔ Intake Manifold) ...

Kia Sportage QL (2015-2024) Service Manual: Fuel Pump Repair procedures


Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the fuel pump assembly. 3. Check motor operation by fuel pump connector (A) connecting power (No.2) a ...

Copyright © www.ksportagegl.com 2015-2024