Kia Sportage: Light bulbs / License plate lamp bulb replacement
.png)
.png)
1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing.
2. Remove the socket from the assembly by turning the socket counterclockwise
until the tabs on the socket align with the slots on the assembly.
3. Remove the bulb from bulb-socket by pulling it out.
4. Insert a new bulb by inserting it into the bulb-socket.
5. Install the socket in the assembly by aligning the tabs on the socket with
the slots in the assembly. Push the socket into the assembly and turn the socket
clockwise.
6. Align the lens cover tabs with the lamp housing notches and snap the lens
into place.
If the high mounted stop lamp (LED) does not operate, we recommend that you have
your vehicle checked by an authorized Kia dealer. ...
If the side repeater lamp (LED type) does not operate, we recommend that you
have your vehicle checked by an authorized Kia dealer. ...
Other information:
These compartments can be used to store small items required by the driver or
passengers.
To avoid possible theft, do not leave valuables in the storage compartment.
Always keep the storage compartment covers closed while driving. Do not
attempt to place so many items in the storage compa ...
Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the
instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor
element) built in the sensor converts the pressure to voltage signal. By using
this signal, the ECM ...