Kia Sportage: Light bulbs / Side repeater lamp (LED type) bulb replacement
.png)
If the side repeater lamp (LED type) does not operate, we recommend that you
have your vehicle checked by an authorized Kia dealer.
1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing.
2. Remove the socket from the assembly by turning the socket counterclockwise
until the tabs on the socket align ...
If the map lamp (bulb and LED type) does not operate, we recommend that you have
your vehicle checked by an authorized Kia dealer. ...
Other information:
1. Raise the wiper arm and pull out the wiper blade assembly.
2. Install the new blade assembly by inserting the center part into the slot
in the wiper arm until it clicks into place.
3. Make sure the blade assembly is installed firmly by trying to pull it slightly.
To prevent damage to the ...
Troubleshooting
Symptom
Suspect Area
Remedy
Engine will not start or is hard to
start (Cranks OK)
Ignition lock switch
Inspect ignition lock switch, or replace as required
Ignition co ...