Kia Sportage: Trailer towing / Safety chains
You should always attach chains between your vehicle and your trailer. Cross the safety chains under the tongue of the trailer so that the tongue will not drop to the road if it becomes separated from the hitch.
Instructions about safety chains may be provided by the hitch manufacturer or by the trailer manufacturer. Follow the manufacturer’s recommendation for attaching safety chains. Always leave just enough slack so you can turn with your trailer. And, never allow safety chains to drag on the ground.
Hitches
It's important to have the correct hitch equipment. Crosswinds, large trucks
going by, and rough roads are a few reasons why you’ll need the right hitch. Here
are some rules to follow:
W ...
Trailer brakes
If your trailer is equipped with a braking system, make sure it conforms to your
state’s regulations and that it is properly installed and operating correctly.
If your trailer weight exceeds the ...
Other information:
Kia Sportage QL (2015-2025) Service Manual: Timing Chain Repair procedures
Removal 1. Remove the cylinder head cover. (Refer to Cylinder Head Assembly - "Cylinder Head Cover") 2. Turn the crankshaft pulley and align its groove with the timing mark of the timing chain cover to set the pi ...
Kia Sportage QL (2015-2025) Service Manual: In-car Sensor (DATC only) Description and operation
Description The In-car air temperature sensor is built in the heater & A/C control unit. The sensor consists of a thermistor that measures the inside temperature. The signal decided by the resistance value that changes in accordance with perceived inside temperature, ...
Copyright © www.ksportagegl.com 2015-2025
