Kia Sportage: Emission Control System
Kia Sportage QL (2015-2026) Service Manual / Emission Control System
- Specifications
- Components and components location
- Description and operation
- Schematic diagrams
- Troubleshooting
- Crankcase Emission Control System
- Schematic diagrams
- Repair procedures
- Positive Crankcase Ventilation (PCV) Valve Description and operation
- Positive Crankcase Ventilation (PCV) Valve Repair procedures
- Evaporative Emission Control System
- Description and operation
- Schematic diagrams
- Canister Repair procedures
- Purge Control Solenoid Valve (PCSV) Specifications
- Purge Control Solenoid Valve (PCSV) Description and operation
- Purge Control Solenoid Valve (PCSV) Schematic diagrams
- Purge Control Solenoid Valve (PCSV) Repair procedures
- Fuel Filler Cap Description and operation
- Fuel Tank Air Filter Repair procedures
- Exhaust Emission Control System
- Description and operation
- Catalytic Converter Description and operation
- Catalytic Converter Repair procedures
- CVVT (Continuously Variable Valve Timing) System Description and operation
- CVVT (Continuously Variable Valve Timing) System Schematic diagrams
- CVVT (Continuously Variable Valve Timing) System Repair procedures
Starter Relay Repair procedures
Inspection
1.
Turn ignition switch OFF and disconnect the battery negative (-) terminal.
2.
Remove the engine room fuel & relay b ...
Specifications
Specifications
Purge Control Solenoid Valve (PCSV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
22.0 - 26 ...
Other information:
Kia Sportage QL (2015-2026) Service Manual: Components and components location
Components 1. Front door trim 2. Front door module & panel 3. Front door belt outside weatherstrip 4. Front door body side weatherstrip 5. Front door side weatherstrip 6. Front door frame molding 7. Front door quadrant inner cover ...
Kia Sportage QL (2015-2026) Service Manual: General information
Identification Number Locations Protection Of The Vehicle Always be sure to cover fenders, seats, and floor areas before starting work. The support rod must be inserted into the hole near the edge of t ...
Copyright © www.ksportagegl.com 2015-2026
