Other information:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the VIS valve connector.
3.
Measure resistance between VIS valve terminals 1 and 2.
Specification: 30.0 - 35.0 Ω [20 ...
To fasten your seatbelt:
1. Extract the tongue plate (A) from the hole on the belt assembly cover.
2. Insert the tongue plate (A) into the buckle (A’) until an audible “click"
is heard, indicating the latch is locked. Make sure the belt is not twisted.
3. Pull out the tongue plat ...